Industrial Diesel Generators

KOEL Green is the Genset brand of Kirloskar Oil Engines Ltd (KOEL), the flagship company of the century old Kirloskar Group. KOEL Green is India's largest selling and most trusted Genset brand for over a decade. Providing back-up power solutions from 2.1 to 5200 kVA for diverse market sectors, "KOEL Green" has over 1 million Gensets in service across the globe.

 

Koel iGreen Offerings

• AMF as standard
• KOEL remote Monitoring
• Silencer inside canopy
• Aesthetically enhanced genset
• QR Code enabled genset
• Multi-colour Status indicator

 

Specifications:

Engine:

• Cummins QSK19 series, 6 cylinder, In-line, 4 stroke, radiator cooled engine
• Full Authority Electronic Engine
• Well designed air handling system with
• Dry type, Replaceable paper element air cleaner with restriction indicator
• Air to air aftercooling
• Optimised turbocharger for increased altitude capabilities
• Best in class fuel economy with
• Modular Commom Rail (MCRS) fuel system with A1 class electronic governing
• Dual fuel filter system: Pre filter including water separator and Water In Fuel (WIF) sensor and main filter
• Standard integral set-mounted radiator system, designed and tested for 50 DegreeC ambient temperature
• Venturi combo spin on lube oil filter
• Plate type lube oil cooler
• First fill of lube oil and coolant
• Electrical starter motor with soft start engagement feature
• Battery charging alternator

Note -

• Available Power : 600-650 kVA

Cummins Power Generation commercial generator sets are fully integrated power generation systems providing optimum performance, fuel economy, reliability and versatility for stationary standby, prime and continuous power applications.

Features:
Cummins heavy-duty engine:

• Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Alternator:

• Several alternator sizes offer selectable motor starting capability with low reactance windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Control system:

• The PowerCommand digital control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry(TM) protective relay, output metering and auto-shutdown.

Cooling system:

• Standard and enhancedintegral set-mounted radiator systems, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat. Also optional remote cooled configuration for non-factory supplied cooling systems.

Warranty and service:

• Backed by a comprehensive warranty and worldwide distributor network.

Note -

• Available Power - 35 to 402  kVA

Sudhir Power has forged a formidable 30 years partnership with Cummins Ltd, to become India’s largest Genset manufacturer with over 20,000 MW installation base. Our complete range of Diesel Generators are useful in providing Power in areas where conventional power supply infrastructure is unreliable. Our product line includes the widest range of Gensets ranging from 7.5 kVA to 3000 kVA, with a fuel option of Diesel or gas, a complete range of intelligent Switchboards, design & build end to end power solutions for your Captive Power Plants, after sales service and Generator Rental

 

Sudhir Power has the distinction of being the first diesel generator company in the country to comply with the latest CPCB II norms for air and noise pollution. Sudhir has the expertise to successfully meet the power requirements of a wide range of individual and institutional customers. Important sectors for power generation solutions are Telecom, Construction, IT/ITES, Realty, Hospitality, Textiles, Auto & Auto Ancillaries, Food Processing, Data Center, Infrastructure, Pharma and Manufacturing sector.

 

Sudhir Cummins Diesel Generator has always been preferred by the public & private sector oil, gas & energy companies whether its HPCL, IOCL, ONGC, GAIL, IGL, BPCL or RELIANCE on the basis of the quality, reliability and business integrity.

 

We are Leading Manufacturer/Supplier/Dealer of cummins Diesel generator, OEM of Cummins Diesel generator in Delhi NCR, Gujarat, Gurgaon, Amritsar , Bhopal, Madhya pradesh, Punjab, Jaipur, Chandigarh, Himachal Pradesh, Jammu & kashmir. For more information about 7.5-3000Kva Diesel Generator

 

Sudhir-Cummins Diesel Generator has Power Command Control, is a microprocessor based generator set monitoring, metering, protection and control system. It offers advanced levels of functions for reliability and optimum genset performance. The power command control with digital paralleling control devices such as synchronizers and load sharing controls, and KVAR / Power factor controls.

Available Power - 7.5 kVA to 3000 kVA

Get Best Price Of The Sudhir Cummins Diesel Genset For Rs.350000/-

• Delivery Time: with in one day

Features:

• High efficiency
• Robust construction
• Maintenance free

Majorly looking for buyers from African Countries.

Lowest life cycle cost:

• K19 series' design features has made Cummins diesel generator sets, the standard for comparison of operating economy, reliability and long life. When all cost factors like initial purchase, fuel, lube oil, maintenance etc. are considered, the bottom line will show that this Cummins 'K19 series' will deliver the lowest life cycle cost.

Heavy duty, durable and emission compliant:

• Cummins 'K19 series' diesel engine comes with heavy duty features, a bigger size camshaft, optimized turbo-matching, electrical STC injectors and is yet compact in size with optimum power to weight ratio making it the obvious choice for your long-term power needs. This genset powered by the reliable Cummins 'K19 series' diesel engine meets stringent exhaust emission tests as per CPCB norms without sacrificing fuel efficiency at normal operating loads.

Silent Power:

• Cummins 500 kVA enclosures are designed so as to have optimum performance and serviceability over the complete operating range. The enclosures are compact with integral fuel tank and are designed for ease in maintenance. The powder coated enclosures are manufactured on latest CNC machines to ensure superior finish and durability.

Single source power assurance:

• Design, manufacture and testing of engine, alternator and other accessories is done by Cummins Group of companies for optimum performance and is backed by a countrywide product support network with a single source responsibility for the entire package.

Specifications:

Engine:

• Cummins K38 series, 12 cylinder, Vee, 4 stroke, radiator cooled engine
• Highly stable and reliable design with square engine
• Well designed air handling system with

 

Details:

• Dry type, Heavy duty, Replaceable paper element air cleaner with restriction indicator
• Outboard aftercooling with 2 pump 2 loop system
• Optimised turbocharger for increased altitude capabilities
• PT fuel system with Electronic Step Timing Control (ESTC) injectors which smoothly stabilize engine speed under load with A1 class electronic governing
• Dual fuel filter system: Pre-filter including water separator and Water In Fuel (WIF) sensor and main filter
• Standard integral set-mounted radiator system, designed and tested for 50 DegreeC ambient temperature
• Full flow paper element type lube oil filters
• Plate type lube oil cooler
• First, fill with lube oil and coolant
• Electrical starter motor with soft start engagement feature
• Battery charging alternator

Note -

• Available Power : 750-810 kVA

Cummins 'K50 series' diesel engine with strong regrindable crankshaft, high strength connecting rod, low pressure fuel lines, STC (Step Timing Controls) injectors and high volume coolant system make 'K50 series' generating sets, more reliable and durable. Engines have clocked millions of hours operating in some of the world's most demanding conditions. Current engines are regularly upgraded with new technologies for better performance and economy. The ultimate proof of superior performance and reliability is the fact that Cummins entities worldwide source these engines from Cummins India for their markets. Cummins 'K50 series' diesel engine generating sets are a truly cost effective solution to long term power need backed by industry best, 2 years / 5000 hrs warranty, for the entire generating set.Special features of Cummins 'K50 series' engines like STC (Step Timing Controls) injectors, low temperature after cooler, square combustion chamber, optimized turbocharging and precision heavy duty camshaft make these engines the ultimate in exceptional fuel efficiency all across the operating range.Design, manufacture and testing of engine, alternator and other accessories is done by Cummins Group of companies for optimum performance and is backed by a countrywide product support network with a single source responsibility for the entire package.

Note -

 

• Available Power - 1250 to1500 kVA

Note -

• Available Power - 1750 to 1800 kVA

CSH Gensets in the medium range from 125 KVA are manufactured with Ashok Leyland engines. These engines are known for their ruggedness, economy of operation and ease of maintenance. Longer service interval also mean lower maintenance cost. The engines are now available with electronic governor which means that the response time to load fluctuation is minimal leading to lower fuel consumption. CSH DGs are manufactured to international design at a state of art pltit in Rudrapur, Uttarakhand. All these engines conform to the latest emission norms (CPCB It) laid down by Govt. of India. These DG sets are available with electronic governor as a standard feature.DG sets of rating 100 KVA and above are manufactured with rock wool as insulating material which has better noise absorbing property. The complete DG sets with silencer inside are the most compact in its category and meet the present noise norms as mandated by CPCB, Govt. of India.

The company has efficient sales and service staff who assist the user in deciding the optimal rating suiting their needs and provide timely after sales support through a network of Ashok Leyland service dealers to keep the DG working.

This range is best suited for small and medium factories, clinics, schools, construction sites, pump houses and apartment blocks. These DGs can be provided with manual or auto start option as per requirement or with synchronizing facility if required. Mobile DGs with 2 or 4 wheeled trolleys are also available.

Note -

 

• Available Power - 1250 to1500 kVA

We Offer the GMDT Diesel Generating set.

GMDT Gen Set comprising of various engines and alternators in line with the client requirements. such engines are Cummins, Volvo, Caterpillar, Perkins, Greaves, Kirloskar, TATA, Mahindra, Ashok Leyland, Eicher, Cooper, Weichai etc.. which couples with Stamford, Leroy-Somer , Crompton Greaves etc. alternators. The complete DG Set range is CPCB II Complaint & NAL (National Aerospace Agency) approved. Each Diesel Electric Genset is manufactured under stringent quality assurance process and undergoes in-house testing. Engine corresponds to ISO 3046, BS 5514 and DIN6271. The technical data applies to an engine operating on a fuel with a calorific value of 42.7 MJ/Kg(10200 Kcai/Kg) and a density of 0.86 Kg/Liter(7.01 LB/us gal). AC Generator performance corresponds to IEC-34, IS-4722.

GMDT Marine & Industrial Engineering Pvt. Ltd. take a quantum leap to enter in to Power Solution business with state of the art technology for input aggregates like engines, alternators, controllers and acoustic enclosures, GMDT provides a fully integrated power system, meeting global standards and at a very competitive overall cost of ownership.

• Packaging Details: Standard Export Packing

Cummins 'K38 series' direct injection, water cooled engine, 12 cylinder, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 has the following specifications

• Cummins PT fuel pump
• Cummins STC injectors
• Cummins turbocharger, Pulse tuned exhaust manifold, Stainless steel exhaust flexible connections
• Radiator or Heat exchanger, Coolant inhibitor,
• Plate type lube oil cooler
• Outboard aftercoolers
• Full flow paper element filters - fuel, lube oil and by-pass
• Dry type replaceable paper element air cleaner with restriction indicator
• Flywheel housing & flywheel to suit single / double bearing alternator
• Flexible coupling for double bearing alternator
• Starting motor - Electric, Battery charging alternator
• Electronic control panel
• Cummins PowerCommand microprocessor based genset controller

Cummins 'QSK60 series' full authority electronic injection, water cooled engine, 16 cylinder, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 /IS 13018 has the following specifications

• Cummins Full Authority electronics
• Cummins HPI injectors
• Cummins turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connections (4 Turbos)
• Radiator or heat exchanger, coolant inhibitor
• Plate type lube oil cooler
• Outboard aftercoolers
• Full flow paper element filters - fuel, lube oil and by-pass
• Dry type replaceable paper element air cleaner with restriction indicator
• Flywheel housing & flywheel to suit single bearing alternator
• Starting motor - Electric
• Battery charging alternator
• Cummins Power Command microprocessor based genset controller
• First fill lube oil

Note -

• Available Power : 1875 - 2250  kVA

M/s. GMDT Marine & Industrial Engineering Pvt Ltd. offers a wide range of distribution and medium power transformers for Marine and industrial application. These transformers can be free breathing or hermetically sealed. Conventional transformers are fitted with a conservator with breather for free breathing while hermetically sealed are without breathing with bolted cover. Wide range of transformers in accordance to respective standards with different combinations can be constructed.

Distribution transformers for Marine and industrial application is available in 3 or 1 phase version with appropriate primary and secondary voltages. We offers single phase distribution transformers, three phase distribution transformers and industrial distribution transformers.

These single phase distribution transformers and three phase distribution transformers are available with 'Tap Changer' options as well as "Off Circuit Manually Operated" and "On Load Tap Changer" (OLTC) with AVR and RTCC panel.

Three Phase Distribution Transformers

Distribution transformers are normally located at a service drop, wires run from a utility pole or underground power lines to a customer's premises. They are often used for the power supply of facilities outside settlements, such as isolated houses, farmyards or pumping stations at relevant voltages.

M/s. GMDT Marine & Industrial Engineering Pvt. Ltd makes three phase distribution transformers are available in stack core / wound core. They are made available in aluminium / copper as per requirement.

Single Phase Distribution Transformers

At GMDT Marine & Industrial Engineering Pvt. Ltd, we offer single phase transformers in CRGO Steel core as well as Amorphous Metal core in line with the client requirement. Single-phase distribution transformers are widely used by utilities to provide 24hour electricity supply in rural areas.

We are in a position to offer any specially designed voltage distribution transformers for special purposes as per customer’s requirements and specifications. Due to the versatile design, unmatched quality and unquestionable performance, these distribution transformers are widely demanded in the market.

Prime quality, low loss, high permeability "Cold Rolled Grain Oriented" silicon steel is used for core to achieve low no load losses.

These industrial distribution transformers have electrolytic copper with insulating paper multi covered round wires and strips are used for both the primary and secondary windings to achieve low load losses.

Copper foil winding technology is used for high current sections to achieve following advantages:

•  Sustaining short circuit forces without any distortion in low voltage and high current windings
• Hot spot in LV windings regulated
• No transposition, stray losses are minimal. Thus total copper losses are also further reduced
• Total copper losses reduced vis-a-vis standard losses. Thus heat dissipating area also reduces

ONAN cooling with conventional pressed steel radiators or corrugated walls are provided for special Transformers ONAF cooling with fans for specific requirement. The terminal of these single phase distribution transformers and three phase distribution transformers arrangement for primary and secondary voltage are decided as per site requirements. Low viscosity transformer oil is provided with in numerous superior grades for specific usage

Applicable standards

IEC / ANSI /BS / IS / SABS/ CENELEC / GOST